English:
Manual for the DGT960
1.
Make your clock ready for use 3
2.
Switching on/off 3
3.
Time measuring with the DGT960 4
4.
Temporarily pause the clock 4
5.
Starting a new game 4
6.
Sound signal 4
7.
Setting of the time measuring modes and
time-controls 4
8.
The time measuring modes of the DGT960 5
9.
Changing of the settings during the game 6
10.
Chess960 position functions 7
11.
Adjusting the contrast 7
12.
Technical specifications 7
13.
Warranty conditions 8
We wish to congratulate you on your decision to buy the
DGT960.
The DGT960 was developed in the Netherlands by
Digital Game Technology BV, the designers of the official
match clock of the World Chess Federation FIDE.
All information as regards the various digital game clocks
by DGT can be found on our website:
www.dgtprojects.com.
We wish you a lot of playing pleasure with your DGT960.
1. Make your clock ready for use
Pull the insulating sheet, marked with the words PULL
out of the battery compartment on the bottom of the
DGT960. Open the timer to switch it on. The DGT960 is
powered by a CR2032-3V button cell battery. When the
voltage of this cell is too low, the low power symbol
will show in the display. You should place a new
battery of the same type by sliding the battery cover open
in the direction of the arrow, then put in the battery with
the + sign visible.
2. Switching on/off
The DGT960 will automatically switch on when the timer
is opened. It will switch off automatically when you close
it. You can also switch the DGT960 off by pressing the
On/Off button
for at least 1 second. You can switch it
on again by pushing the On/Off button
briefly.
To Next Page
Loading...
