What to do if Dialog Computer Hardware Wingle is not responsive?
If your Dialog Computer Hardware Wingle is not responding, try rebooting it. Press and hold the 'Reset' button for approximately 5 seconds. This action will restore the Wingle to its factory settings.
General| Model | Dialog 4G Wingle |
|---|---|
| Network Type | 4G LTE |
| Max. Wi-Fi Users | 10 |
| USB Interface | USB 2.0 |
| Supported OS | Windows, Mac, Linux |
| Download Speed | Up to 150 Mbps |
| Upload Speed | Up to 50 Mbps |
| Interface | USB |
| Connectivity | Wi-Fi |
| Battery | No |
| Compatibility | 4G LTE Networks |
Identifies the USB connector for connecting the Wingle to a computer.
Plugging the Wingle into a PC's USB port for network access.
Waiting for the signal indicator to turn green, confirming network connection.
Accessing the management interface via the specified IP address in a browser.
Entering username and password to log into the device management website.
Rebooting the Wingle using the reset button to restore factory settings.
To Next Page