Need help?Do you have a question about the Dialogic DSI SS7MD and is the answer not in the manual?
General| Brand | Dialogic |
|---|---|
| Model | DSI SS7MD |
| Category | Network Card |
| Language | English |
Lists related documentation and resources for Dialogic® DSI SS7MD Boards.
Identifies the Dialogic® DSI SS7MD Network Interface Board family and specific models.
Details the features and specifications of the DSI SS7MDL4 board, including interfaces and capacity.
Explains the licensing requirements for Dialogic® DSI SS7MD software and features.
Describes the available software packages for Dialogic® DSI SS7MD Boards.
Provides instructions for installing the Dialogic® DSI SS7MD Development Package on Linux systems.
Outlines the steps for installing the Dialogic® DSI SS7MD Development Package on Solaris systems.
Discusses configurable options and local regulatory requirements for Dialogic® DSI SS7MD Boards.
Describes how to configure the Dialogic® DSI SS7MD system using the system.txt file.
Explains how to configure protocol modules using the s7_mgt utility or discrete messages.
Details how to use the monitoring option for Dialogic® DSI SS7MD Boards.
Explains how to control dynamic switching of timeslots between Line Interface Units (LIUs).
Details the thermal protection features and operation of the DSI SS7MDL4 board.
Provides steps to start and execute programs on Linux and Solaris systems.
Describes general configuration messages used for initializing and configuring modules.
Details messages used for controlling hardware devices like LIUs and cross connect switches.
Covers messages for activating/deactivating signaling links and communication between MTP3 and user parts.
Describes messages for configuring, activating, and deactivating ATM links.
Describes messages used to poll the status of modules or systems running on the board.
Lists commands for configuring physical interfaces like SS7_BOARD and LIU_CONFIG.
Covers commands for configuring Message Transfer Part (MTP) parameters.
Details commands for configuring ISUP protocol parameters and timers.
Lists commands for configuring the Signal Connection Control Part (SCCP) protocol.
Covers commands for configuring the Transaction Capabilities Application Part (TCAP) protocol.
Describes the s7_log utility for logging and displaying messages on the host console.
Explains the gctload utility for initializing the system and managing processes.
Explains the s7_mgt utility for one-time protocol configuration.
Describes the ssdm utility for board interface and software download management.
Provides guidelines for protocol configuration by sending individual messages directly to the board.
Provides guidelines for selecting server chassis that offer sufficient cooling for the DSI SS7MDL4 board.
To Next Page