THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
Contents of the supply
N.B.! The supply may vary depending on the order.
Intended use
Allowed operating conditions
The appliance has been exclusively designed to operate inside of rooms within the prescribed technical and capacity
limits. The following indications must be observed in order to attain ideal operation and safe work conditions.
The appliance must be installed in a suitable place, namely, one which allows normal running, routine and extraordinary
maintenance operations. The operating area for maintenance must be set up in such a way in which the safety of the
operator is not endangered.
The room must also be provided with the features required for installation, such as:
• room temperature > + 5 °C;
• maximum relative humidity: 80%;
• maximum cooling water temperature > + 10 °C;
• the oor must be perfectly level, at and slip-proof;
• the room must be equipped with a ventilation system and lighting as prescribed by standards in force in the country
of the user;
• the room must be set up for draining greywater, and must have switches and ood gates which cut all types of sup-
ply upstream the appliance when needed;
• the walls around the appliance must be reproof and/or insulated against possible heat sources.
Test inspection and warranty
To Next Page
Loading...