Diamond 500250-01 User Manual

OWNER’S MANUAL
Pre-Charged Pressure and
Horizontal Tanks and Fittings
NOTICE D’UTILISATION
Réservoirs horizontaux et à pression
préchargée, avec connexions
MANUAL DEL USUARIO
Tanques de presion precargada,
tanques horizontales y accesorios
©2007 DI490 (Rev. 12/6/07)
293 Wright St., Delavan, WI 53115
Phone: 1-800-265-7241
Fax: 1-800-925-3486
E-Mail: info@diamondpump.com
Web Site: http://www.diamondpump.com
MODEL NUMBERS
NUMÉROS DE MODÈLE
NÚMEROS DE MODELO
500104-01
500201-01
502105-01
500202-01
500203-01
500250-01
500302-01
500350-01
Installation/Operation/Parts
For further operating,
installation, or maintenance
assistance:
Call 1-800-265-7241
English..................... Pages 2-7
Installation/Fonctionnement/Pièces
Pour plus de renseignements
concernant l’utilisation,
l’installation ou l’entretien,
Composer le 1 (800) 265-7241
Français ................ Pages 8-13
Instalación/Operación/Piezas
Para mayor información sobre
el funcionamiento, instalación
o mantenimiento de la bomba:
Llame al 1-800-265-7241
Español..............Paginas 14-19

Diamond 500250-01 Specifications

General

Brand	Diamond
Model	500250-01
Category	Water Heater
Language	English

Summary

Diamond Pump Owner's Manual

Model Number Identification

Lists available Diamond pump model numbers for pre-charged tanks.

Safety and Warranty Information

General Safety Instructions and Warnings

Details hazard signal words (DANGER, WARNING, CAUTION) and crucial safety precautions.

Warranty Coverage and Terms

Outlines the 12-month warranty, exceptions, and general terms for Diamond products.

General Information and Operation

Tank Pre-Charge and System Setup

Explains factory pre-charge, pressure switch settings, and tank connection.

Operating Cycle Explanation

Illustrates and describes the water-air cycle within the pre-charged tank.

Standard Tank Replacement Guidance

Advises on replacing standard tanks with pre-charged units and equivalency.

Installation Procedures

Plugging AVC Ports and Bleeder Orifices

Instructions for modifying existing pump systems for pre-charged tanks.

System Flushing and Air Check

Steps for flushing air from the system and checking tank air charge.

Installation and Product Data

Testing for Bladder Leakage

Procedure to test the tank bladder for leaks and potential water shift.

Pre-Charged Tank Specifications

Detailed drawdown, capacity, dimensions, and tapping for pre-charged tanks.

Repair Parts Information

Repair Parts for Models 500104-01 & 502105-01

Lists key components and part numbers for specific Diamond tank models.

Repair Parts for Models 500201-01 to 500350-01

Lists key components and part numbers for additional Diamond tank models.