_______________________________
DOUGH
MIXER IRIS
_______________________________
18
Screw clockwise to tighten the belts,
unscrew to loosen or completely annul the
belt tension.
To replace any broken belts, first loosen them
with the two knobs (24 Fig. 1), remove the
side inspection panel (8 Fig. 1), then
replace the broken belts. Always refer to
the spare parts tables which show the
location of the various different
components. At the end of the operation,
tighten the belts in the correct way and fit
the side inspection panel back in place
with the relative four screws.
5.3 STORAGE
If the machine is to remain idle for a long
period of time, it must first be thoroughly
cleaned, the parts liable to wear must be
lubricated and the entire machine covered
with a plastic cloth.
If these operations are carried out with care, it
will be all to the advantage of the user, who
will find the machine in an excellent condition
when it is required for use once more.
Comply with the laws in force in the country
where the machine is used when it comes to
the way the products used for cleaning and
servicing the machine are used and disposed
of. Also comply with the recommendations of
the manufacturers of such products.
WARNING
If the machine is dismantled, comply with
the anti-pollution laws in force in the
country of use.
To Next Page
Loading...
