12
If DiamondBoxx M3 is already there, delete it. Now
power on the DiamondBoxx and watch for
DiamondBoxx M3 to pop-up on the device list. Select it
and it should connect within 10 seconds.
The DiamondBoxx Enclosure
The enclosure is made from Medium Density Fiberboard
(MDF). This is what most great sounding are made from.
No plastic. As such, it is difficult to manfacuture any
crazy curvy shapes as possible with, but it SOUNDS
better. Isn’t that the point? The DiamondBoxx
enclosure is sealed using DURATEX speaker coating that
will provide years of protection. If it should ever get
damaged beyond your liking by knocking it into things,
dropping it, scratching it and such, all is not lost. You
can send it to us in the ORIGINAL PACKING or
equivalent and we can replace the enclosure for a small
fee. As they are all hand built and rolled it is normal for
there to be slight inconsistencies in the finish. Consider
them like beauty marks, specific to your DiamondBoxx.
To clean just wipe down with a water dampened cloth.
Happy Listening!
Tony D'Amore
CEO
DiamondBoxx
To Next Page
Loading...
