4
The TWS Button
This controls the TWS (True Wireless Stereo) system on
the DiamondBoxx. This is used to connect two
DiamondBoxx 2
nd
generation or later together wirelessly
in a split stereo pair for an amazing, headphone like
stereo experience.
To USE TWS (True Wireless Stereo) System
1. Start with both DiamondBoxxes powered OFF.
2. Power up one of the DiamondBoxx, pair your
Bluetooth device with it. Start streaming some
music to it.
3. Power up the 2
nd
DiamondBoxx
4. Now go back to the 1
st
DiamondBoxx, press and
hold the TWS button until the Diamond starts
flashing Blue then release button. This will set
this DiamondBoxx to “MAIN” speaker which will
receive and play LEFT audio only.
To Next Page
Loading...
