DiamondBoxx XL2 - LED Bar Display Indicators; MODE;TWS Switch Functionality

3
The LED bar display
The LED bar display can tell you three things.
1. The battery charge level in 10% increments
2. The output volume level relative to maxium
output
3. The TWS (True Wireless Stereo) setting mode
When the DiamondBoxx is first turned on the LED
display will display the battery level for about 5
seconds. After this the LED bar will become a stereo
output volume level indicator. It will display TWS mode
only while setting up the TWS connection.
The MODE/TWS Switch
This is used for switching between SQ (Sound Quality)
mode and SP (Sound Pressure) modes, as well as
controlling the TWS (True Wireless Stereo) function. A
quick press and release of the button will toggle the
DiamondBoxx XL2 between SQ mode and SP mode. The
indicator on the Mode switch will illuminate blue when
in SP mode. Use the chart on next page to decide which
mode is most fitting for the situation.