Need help?Do you have a question about the diapath Donatello and is the answer not in the manual?
Specifies the intended purpose and user qualifications for the tissue processor.
Details about the device, including model and registration plate.
Guidelines for proper storage and environmental requirements for the instrument.
Explains danger, caution, biohazard, and heated surface warning symbols.
Critical warnings regarding instrument modification, power supply, and reagent handling.
Explains DAF, FPS, Multisense, and EWD/PWD systems.
Requirements and steps for correctly placing and installing the instrument.
Procedures for receiving, unpacking, and checking the instrument for damages.
Steps for unpacking and setting up the PC/Monitor unit.
Instructions for repacking the instrument for moving or transport.
Steps to perform immediately after turning the instrument on.
Checklist for preparing the instrument before running a protocol.
Steps to follow after a processing protocol has finished.
Correct method for powering down the instrument.
Identification of main components and key functionalities.
Electrical, environmental specs, and included parts.
Details capacity, loading configurations, and level sensor functions.
Describes the function that uses only necessary reagent for racks.
Describes systems for draining exhausted wax from the instrument.
Identifies reagent positions and lists compatible reagents.
Explains DAF, RFill/RDrain, FPS, and Reagent Management Module.
Overview of the instrument's primary user interface screen.
Displays real-time status, warnings, alarms, and tank positions.
Details normal processing, safety warnings, and inverted modes.
Screen to track cassettes and set protocol end times.
Details starting the process, pausing, stopping, and bubbling.
Procedure for initiating a washing protocol to clean the instrument.
Procedures for replacing reagent tanks and filters.
Steps for inserting a new tank with cleaned reagent.
General and Diapath settings for instrument parameters.
Tools for creating, copying, modifying, and deleting protocols.
Various manual tests and operations for diagnosis and maintenance.
Setting and managing reagent properties, tanks, and RMS.
Configuration and selection of processing profiles based on lab needs.
Access to history, logs, and printing options.
Introduction to traceability and procedure for specimen insertion.
Viewing specimen data, process status, and configurations.
Procedure for specimen preservation during power failure using safe reagent.
Procedures for restarting the instrument after interruptions.
Lists and explains various non-blocking instrument warnings.
Lists and explains instrument alarms that halt operation.
Daily, monthly, and annual tasks, including decontamination.
Cleaning displays, surfaces, filters, fuses, and gaskets.
Recommendation and schedule for professional preventive maintenance.
Common causes and solutions for power and wax melting problems.
Lists of optional, consumable, and available accessories with codes.
Procedures for instrument decontamination and disposal.
Terms and conditions of the instrument's warranty coverage.
General| Brand | diapath |
|---|---|
| Model | Donatello |
| Category | Computer Hardware |
| Language | English |
To Next Page