DiBO n.v. 65
Dosage softener:
If one select the command ‘water softener’ in the menu by pushing on the hot water button is it possible to adjust
the desired dosage. The possible adjustments are: normal, high, low or no dosage.
These can be selected by pushing via the ‘+’ and ‘-’ buttons till the desired dosage is founded and confirm than
with the warm water button. Push on the reset button to go back.
Even here this remark is valid: the machine will return on the last adjusted value.
Software version:
If you select this path in the menu you can look which software version is consulted in the cleaner.
3. Main switch
The main switch is mounted centrally on the serving panel and has a red colour with a yellow border.
The main switch has two positions:
- 0: OFF - stop
- 1: ON- Start (working position)
4. Pressure regulator
The pressure regulator is mounted at the right on top of the operating panel.
On the pressure regulator is a turning button, which can adjust the spray pressure infinitely variable.
Turning the button to the right is a higher pressure (+). Turning the button to left is a lower pressure (-).
The pressure can only be adjusted if the spray gun is served.
1. 2. 3.
.
.
To Next Page
Loading...
Need help?
General
