OPERATOR’S MANUAL
4 / BASIC SETUP ISO
6
Version 4 Quick Start Guide
6011662 Rev B
BASIC SETUP
The ISO
6
Quick Start Guide provides the basic steps for user
level 2 and 3 administrators to setup a system.
The IntelliAg system is accessed by pressing the ISO
6
button in
the UT object pool selection box (location will vary with UT mfg).
Figure 1
Accessing IntelliAg IS06 Screens
USER LEVEL 2 (DEALER)
User Level 2 provides open access to all setup/configuration
screens excluding Factory Reset and the Alarm Log (User Level
3 access). To change from operator level to dealer level, a 6-digit
password is required. Password includes the five-digit serial
number found on the label of the ISO
6
module or on the
Version screen.
To Next Page
Loading...
