OPERATOR’S MANUAL
M-3G/M-20P Operation and File Handling
11001-1361-200512
PRODUCT SPECIFICATIONS 5
PRODUCT SPECIFICATIONS
PERFORMANCE
Operating range (moisture): Grain dependent
Fill technique: Scoop or fast fill from auger
Repeatability: +/- .5% depending on grain (normal stored grain)
Bias: Operator adjustable for agreement with reference meter
Grain temperature compensation: Automatic
Resolution: .1% moisture display (graphic LCD)
Power: One 9V alkaline battery
Warranty: One year
Weight: 1 lb., 6 oz.
Communications: USB port (type B connector)
USB CONNECTIVITY
PC INTERFACE
The M-3G and M-20P may be interfaced to a personal computer using a
USB cable. Using an executable file provided on the DICKEY-john website
(located at www.dickey-john.com), the PC can interrogate the unit and
retrieve its calibration files, or it can send the unit new calibration files.
Likewise, language files are handled much in the same manner, allowing
the unit to be configured for different languages. This connectivity also
provides calibration and diagnostic information which is beyond the scope
of this document.
The files associated with this USB connectivity are available on the
DICKEY-john website.
REGULATORY REQUIREMENTS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
To Next Page
