To Next PageTo Next Page
Need help?Do you have a question about the Dickson KT8 and is the answer not in the manual?
General| Temperature Range | -40°C to 70°C (-40°F to 158°F) |
|---|---|
| Resolution | 0.1°F/°C |
| Display | LCD |
| Mounting | Wall Mount |
| Data Logging | Yes |
| Sensor Type | Internal |
Describes how Dickson instruments and sensors are designed to work together, requiring specific pairings.
Explains that only the Replaceable Sensor is calibrated, storing data and dictating accuracy.
Details recalibration options for Replaceable Sensors, allowing replacement or return for recalibration.
Details the 7-day chart rotation setting for the recorder.
Provides step-by-step instructions for initial setup and operation of the chart recorder.
Explains the function of the ON/OFF, PEN HOME, and ALARM buttons for user interaction.
Details AC power operation and 4 AA battery backup, including limitations.
Explains the role of the red and blue pens in recording temperature and their offset.
Describes how to adjust pen location on the chart to match the display for accuracy.
Explains the function of SPST relay contacts that close on alarm conditions.
Details the meaning of different LED indicator states for power and battery status.
Instructions to activate calibration mode by pressing specific buttons.
How to increase or decrease the unit of measurement and switch between pens.
Steps to save adjustments and exit calibration mode, including timeout.
Step-by-step guide for removing and installing a new chart on the recorder.
Instructions for removing used pen cartridges and installing new ones.
Information on pen movement speed for different recording modes.
Instructions on setting DIP switches for 7-day, 24-hour, and 31-day recording times.
Guide for setting DIP switches to select °F/°C and specific temperature ranges.
Addresses problems with the chart not keeping time or running slowly.
Explains why the chart may stop turning and how to resolve it.
Troubleshooting for discrepancies between the display and chart readings.
Guidance on resolving the 'PROB' error message, often sensor-related.
Answers why calibration may seem off and discusses tolerances.
Explains common reasons why the battery back-up may not function correctly.
Troubleshooting steps for when the unit does not respond to button presses.
Provides steps to reset the unit if it fails to power on.
Details the warranty period and coverage for instruments.
Instructions for obtaining service or returning instruments, including RA number.
