EasyManua.ls Logo

dicodes Dani Box Micro - 06 Extended Functions Menu Details (Page 4); Factory Reset and Statistical Counters

dicodes Dani Box Micro
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
06ExtendedFunctionsMenu
TheExtendedFunctionsMenuhasanothersub-menushowingseveral
statisticalvalues.
Therearetwotypesofvalue-counters,eitherresettabletozeroornot.
Thefollowingstatisticalvaluesarestored:
-CyclesNumberofpuffs.Thecountercanberesetto0.
-TimeThetimespanduringwhichpowerwasappliedtothecoil,
i.e.vapingtime.Thecountercanberesetto0.
-TotCycl“TotalCycles”isthenumberofpuffsthroughouttheentire
mod’slife.Itcannotbereset.
-TotTime“TotalTime”isthetotaltimeofvaping(notstandby)in
aformatHHHH:MMthatis4digitsofhoursand2forminutes.
Itcannotbereset.
Themenuitem ,i.etheresettingofthecounters,isintentionallypositioned
betweenresettablecountersandthosewhichcannotbereset.Soitiseasiertoremember,
whicharereset.
ResetCntr
AdditionalExplanationtoseveralmenuitems,page3
With“SetDefaults”itispossibletoresetallsettingstothedeliverystatus.
Theresetisinitiatedbyselectingthemenuandpressingabutton.Toavoid
unintendedresettingtheuserhastoconfirmtheprocedurebyagainpressing
MostofthedefaultsarelistedintheoverviewdiagramoftheExtendedFunctionsMenu.
Thosesettingsmissingthereare:
Power:
Temperature:
HeaterControlMode:
WireType:
10W
210°C
0(Power,normalVW)
NiFe(320)
thebuttonwhen“confirm”isdisplayed.“Process”showsthattheresetisperformed.
Thestatisticcountersaresavedwheneverthemodisautomaticallyormanuallyswitchedoff.
Incontrast,ifthebatteryisremovedfromthemodbeforeswitchingoff,thechangesofthe
counterssincethelastswitchingonarelost.
Chargingthedevice
Thedevicehastwochargingoptions:
TherecommendedchargingmodeistousethebuiltinUSB-Cconnectiontoareadilyavailable(wall-)
power-supplywithUSB-Aoutput,withaminimumoutputcurrentof2Amps.NotethattheUSB-Cport
ontheDaniBoxMicroisachargeonlyport.
ThesecondoptionistousethechargingcontactwiththeuseoftheCS1chargestationbydicodes.
ThechargecurrentoftheCS1dependsonthecontactresistancebetweendeviceandstationistypically
1A(2Amaximum,limitedbytheCS1).