Dicota Link - Page 2

2
Package contents:
• USB 2.0 high-speed data transfer adapter
• USB 2.0 high-speed data transfer cable
• Driver & Manual CD
System Requirements
:
• Windows
®
98SE*, ME, 2000, XP
• An available USB Port
• CD-ROM drive (for driver installation)
* Driver needed.
Driver Installation
Windows
®
98SE
1. Turn on your computer.
2. Place the Driver CD into your CD-ROM drive.
3. Click “Start”, then “Run…”, type “D:\ T-bird Win98Driver.exe” into
the dialog box (NOTE: “D:\” represents the drive letter assigned to the
optical drive you are using. If
D is not the letter assigned to your optical
drive, replace
D with the appropriate drive letter), then click “OK”.
Follow the onscreen instructions to complete the driver installation.
4. After the driver installation is complete, restart your computer.
5. After your computer has restarted, plug your Link into an available
USB port. Windows
®
will install the driver for your Link.
6. Restart your computer again if necessary.
7. Your Link is now ready to be used.
Windows
®
ME, 2000, XP
1. Turn on your computer.
2. Plug your Link into an available USB port. Windows
®
will install the
driver for your Link automatically.
3. Your Link is now ready to be used.
english