It is designed to control the vacuum function,press it to release all the suction.
(please ask your patients to take it during the cryolipolysis treatment,if any emergency,then they
could press it to release all the suction).
Insert it into the emergency bar socket.
6.
cavitation Hand piece:
Take the cavitation hand piece on the relevant holder,then insert it into the cavitation 4 pins socket.
7.
Radio frequency for Body :
Take the RF-body hand piece on the relevant holder,then insert it into the RF-body 6 pins socket.
8.
Radio frequency for Face :
Take the RF-body hand piece on the relevant holder,then insert it into the RF-body 5 pins socket.
9.Lipo Laser hand pieces:
6 pads diode lasers.
Take the lipo laser pads on the holder top of the machine.then insert them into the laser socket.
10.the filter cleaning
When the liquid in the filter exceeds more than half of the bottle, please clean
the filter immediately as following picture,
when you cleaning the filter,please don't miss any small parts.
To Next Page
Loading...