To Next PageTo Next Page
Need help?Do you have a question about the Die-Profi-Permament-Liner CoolMax 360 and is the answer not in the manual?
Essential safety measures for equipment handling, electrical safety, and general care.
Instructions on system usage, contraindications, and specific patient restrictions.
Step-by-step explanation of the cryolipolysis process and its effects on fat cells.
Guidelines for professional operation, water level, membrane use, and basic cleaning.
Lists patients and conditions for whom the device is contraindicated or requires medical advice.
Crucial steps for handpiece installation and professional supervision during operation.
Details on the function and operation of the emergency stop button and key switch.
Description and connection instructions for the large cryolipolysis hand piece with 4 size CUPs.
Description and connection instructions for the medium cryolipolysis hand piece with 3 size CUPs.
Details for the small cryolipolysis hand piece, specifically for double chin removal.
Overview of the 4.3-inch touch screen interface for cryolipolysis handpieces and their controls.
Information on the suction emergency stop switch for immediate suction release.
Instructions for connecting the cavitation hand piece to its 4-pin socket.
Instructions for connecting the RF body hand piece to its 6-pin socket.
Instructions for connecting the RF face hand piece to its 5-pin socket.
Instructions for connecting the lipo laser pads to the machine's laser socket.
Procedure for cleaning the filter when the liquid level exceeds half the bottle.
Step-by-step guide for filling the water tank, including recommended procedures and frequency.
Instructions on how to drain the water tank, involving connecting tubes to overflow and outlet holes.
Recommendations for device care during periods of inactivity and handling water reminders.
Details on the factory warranty terms, duration, and coverage for the device and spare parts.
Conditions and items that are not covered by the warranty, leading to an 'Out of Warranty' status.
Key benefits of the maintenance program, focusing on ease of problem identification and solution.
Conditions for returning the machine, including documentation requirements and shipping responsibilities.
List of medical conditions and patient types that are contraindicated for treatment with the device.
Essential precautions to follow during operation, including room temperature and skin protection.
Overview of the main touch screen interface and its primary function selection buttons.
Navigating to the Large Cryolipolysis & Vacuum & PDT function interface.
Navigating to the Cavitation function interface.
Navigating to the Lipo Laser function interface.
Navigating to the Body RF function interface.
Navigating to the Lipo Laser interface.
Detailed steps for setting treatment time, vacuum mode, vacuum power, and cryo level.
Adjusting the treatment duration from 5 to 60 minutes.
Selecting the vacuum mode from M1, M2, M3, or M4.
Adjusting the vacuum power level from 10% to 100%.
Adjusting the cryo temperature level from -11 to 5 degrees Celsius.
Description of the heating massage program and the transition to cooling state.
Instructions for setting treatment time, mode, and power for cavitation treatments.
Adjusting the treatment time for cavitation from 5 to 30 minutes.
Selecting the cavitation mode from Auto, M1, M2, or M3.
Adjusting the cavitation power level from 10% to 100%.
Initiating the cavitation treatment after parameter adjustment.
Pausing the treatment to adjust parameters during operation.
Using the back button to navigate to the main function interface.
Procedure to terminate the cavitation treatment.
Steps for setting treatment time, RF mode, and RF power for body treatments.
Adjusting the treatment time for BODY-RF from 5 to 30 minutes.
Selecting the RF mode for body treatments from Auto, M1, M2, M3.
Adjusting the RF power level for body treatments from 10% to 100%.
Initiating the BODY-RF treatment, including footswitch operation.
Pausing the BODY-RF treatment to modify parameters.
Navigating back to the main function interface after pausing.
Procedure to stop the BODY-RF treatment.
Instructions for setting treatment time, RF mode, and RF power for face treatments.
Adjusting the treatment time for FACE-RF from 5 to 30 minutes.
Selecting the RF mode for face treatments from Auto, M1, M2, M3.
Adjusting the RF power level for face treatments from 10% to 100%.
Initiating the FACE-RF treatment, including footswitch operation.
Pausing the FACE-RF treatment to modify parameters.
Navigating back to the main function interface after pausing.
Procedure to stop the FACE-RF treatment.
Instructions for setting treatment time, laser mode, and laser power for lipo laser treatments.
Adjusting the treatment time for LipoLaser from 5 to 30 minutes.
Selecting the laser mode from Auto, M1, M2, M3.
Adjusting the laser power level from 10% to 100%.
Touching any laser pad to select it for operation.
Initiating the LipoLaser treatment after parameter adjustment.
Pausing the LipoLaser treatment to modify parameters.
Navigating back to the main function interface after pausing.
Procedure to stop the LipoLaser treatment.
Steps to conclude the treatment, including stopping the machine and cleaning accessories.
Detailed specifications including temperature, power, vacuum, display, and handpiece sizes.
Dimensions of the cooling areas for Large and Medium Cryo handles.
Details on Cavitation, RF frequencies, and Lipo Laser power and quantity.
Information on power supply voltage and the advantage of dual cryo handle operation.
Legal warranty terms and factory warranty duration for the device.
What the guarantee covers, including exceptions for improper use and unauthorized intervention.
Information on extended factory warranty, repairs, and post-warranty replacement.
General| Brand | Die-Profi-Permament-Liner |
|---|---|
| Model | CoolMax 360 |
| Category | Medical Equipment |
| Language | English |
