Need help?Do you have a question about the DIEBOLD NIXDORF CINEO C1010 and is the answer not in the manual?
Explains symbols for important information and warnings in the manual.
Instructions for unpacking, checking items, and reporting discrepancies or defects.
Explains how to interpret the product label, including model and serial numbers.
Instructions for unpacking the device and checking for transit damage.
Identifies and labels the components visible on the front of the CINEO C1010 unit.
Explains the meaning of different lighting patterns indicating the device's status.
Identifies and labels the components visible on the rear of the CINEO C1010 unit.
Describes the layered structure of the CINEO C1010, detailing components within each layer.
Explains how coins are dropped into the funnel and processed by the centrifuge.
Describes how centrifugal force arranges coins for checking.
Explains how sensors measure coin properties for acceptance.
Details how the spiral routes accepted coins to hoppers.
Explains how coin hoppers collect denominations and the payout mechanism.
Table detailing payout capacity for Euro coins, including hopper numbers and volumes.
Explains how sensors ensure coins reach hoppers and transmit status to the control unit.
Describes the function of the optional transfer cassette for filling hoppers.
Lists functions available through the optional user interface for configuration and diagnostics.
Details how to open the CINEO C1010 lid using the top keylock, push-button, and handle.
Illustrates the coin path and sensors involved in the CINEO C1010.
Instructions on how to safely power the CINEO C1010 on and off using the rear switch.
Details how to open and close the coin payout unit for maintenance or to clear jams.
Describes refilling hoppers using the coin input funnel and associated software.
Provides instructions for manually refilling coin hoppers by opening the payout unit.
Explains how to empty hoppers using the coin return tray and associated software.
Details the procedure for quickly removing the coin tray and emptying the hoppers.
Provides step-by-step instructions for manually removing and refilling individual coin hoppers.
Lists essential safety precautions to take before and during cleaning operations.
Provides general advice on cleaning, including operator tasks and personnel requirements for locks.
Details the procedure for cleaning the coin path, including necessary tools and frequency.
Explains how to clean the centrifuge component using compressed air and brushes.
Details the process for cleaning coin hoppers and the return belt.
Explains how to view the installed firmware versions on the device.
Describes how to connect the CINEO C1010 to a PC for updates using a USB cable.
Outlines the process for downloading and uploading new firmware versions.
Introduces how status and error messages indicate malfunctions and troubleshooting steps.
Explains how to interpret status illuminations for quick troubleshooting.
Describes the meaning of status and error messages transmitted to the control software.
Lists error codes and the relevant CINEO C1010 unit where the error occurred.
Specifies environmental conditions for operation, transport, and storage, including vibration classes.
Details the USB standard B port pinout and function.
Describes the power connector type, manufacturer, and pinout.
Provides diagrams with dimensions for installation and service access.
Shows a block diagram illustrating motor connections within the CINEO C1010.
Explains compliance with EEC directives and the meaning of the CE mark.
Details FCC compliance for Class A digital devices and interference guidelines.
General| Brand | DIEBOLD NIXDORF |
|---|---|
| Model | CINEO C1010 |
| Category | Cash Counters & Coin Sorters |
| Language | English |
To Next Page