Need help?Do you have a question about the DIEBOLD NIXDORF R1 and is the answer not in the manual?
Block diagram of the R1-Motherboard, detailing component interconnections and data pathways.
Block diagram of the R2-Motherboard, illustrating component interconnections and data pathways.
Details on the motherboard's DDR4 SO-DIMM sockets and memory configuration.
Information on Clear RTC RAM and Intel ME jumpers, including their functions and settings.
Hardware interface details for motherboard components.
Detailed description and layout of the motherboard's rear panel connectors.
Description of internal motherboard connectors like LPT, USB 2.0, ATX power, and fan headers.
Instructions on how to access the BIOS Setup utility during the system's initial startup.
Methods to enter the BIOS Setup after the Power-On Self Test (POST) is completed.
Information on the BIOS protection technology that automatically recovers the system's BIOS.
Explanation of how the EZFlash utility and a BIOS backup file enable self-recovery.
Overview of the BIOS menu bar and its main items: Info, Main, Advanced, Monitor, Boot, Tool, Exit, Event Logs.
Option to set the system's current date.
Option to set the system's current time.
Displays an overview of the basic system information.
Menu items for changing system security settings, including administrator and boot menu passwords.
Configuration options for platform-related features like PCI Express Native Power Management and ASPM.
Details on CPU-related information and settings, including SGX, TCC Offset, and prefetchers.
Configuration options for the System Agent, including VT-d, Above 4G Decoding, and Memory Remap.
Settings for SATA controllers and modes, including AHCI and Intel RST Premium.
Configuration options for the Intel® Active Management Technology (AMT) feature.
Configuration options for Trusted Platform Module (TPM) and other security-related features.
Settings to enable or disable onboard devices like HD Audio, LAN, Serial Port, and Parallel Port.
Power management settings including ErP Ready, Restore AC Power Loss, and Wake on LAN/PCIe.
Configuration for serial port console redirection, terminal type, and transmission speed.
Displays information related to Intel® Trusted Execution Technology (TXT).
Settings for USB hardware delays, time-outs, and individual USB port control.
Options to enable or disable the UEFI network stack and PXE boot support.
Displays information about the NVMe controller and connected devices.
Displays SMART information for connected devices, noting NVM Express devices are not supported.
Allows configuration of RAID settings, including RAID volumes and hot plug support.
Configuration options for Ethernet settings, including link speed and Wake On LAN.
Settings for boot logo display, POST delay times, and NumLock state.
Options for POST warnings, including whether to stop booting.
Enables or disables the AMI Native NVMe Driver Support.
Enables or disables the F10 Boot Menu option.
Enables or disables booting from USB devices.
Enables or disables the watchdog timer feature.
Enables or disables a beep at the end of the POST phase.
Enables or disables the RAM Error LED indicator.
Enables or disables the CPU/Chipset Initialization Error LED.
Enables or disables the NVRAM Error LED indicator.
Enables or disables the Graphics Error LED indicator.
Enables or disables the CPU temperature Error LED indicator.
Enables or disables the Fan Speed Error LED indicator.
Selects the installed operating system for Secure Boot check.
Manages Secure Boot keys, including PK, KEK, DB, and DBX.
Utility for updating the BIOS, requiring confirmation before proceeding.
Runs a quick diagnostic test on the system's memory modules.
Performs a quick diagnostic test on the system's hard disk drives.
Runs a diagnostic test to stress the CPU and check its performance.
Loads the default values for all BIOS setup parameters.
Saves all made changes and restarts the system.
Exits the setup program without saving any changes.
Attempts to launch the EFI Shell application from available USB storage.
Allows changing the configuration settings for the SMBIOS event log.
Allows viewing all recorded events in the SMBIOS event logs.
General| Brand | DIEBOLD NIXDORF |
|---|---|
| Model | R1 |
| Category | Motherboard |
| Language | English |
To Next Page