Run a diagnostic test print
Open
cover
Push and hold
Paper Feed
Button while
closing cover
Configure the printer if necessary
The TH250 is an ENERGY STAR® qualified
printer. To set or to adjust the energy-savings
timeout value:
Select “Set Firmware Features” from the main
menu. Scroll to “Set Enter ENERGY STAR
Timeout Value?” Select “Yes”. Printer responds
with the following timeout value selections:
- Disable (no timeout) -> 1 click
- 15 minute timeout -> 2 clicks
- 30 minute timeout -> 3 clicks
- 60 minute timeout -> 4 clicks
Enter clicks for selection, then hold button
down at least 1 second to validate.
Power cycle the printer.
To revive a printer that has entered the energy-
savings mode, press the paper feed button.
Current printer tallies are
printed after the
diagnistic information
and will vary per printer
use.
Safety instructions
Do not touch the printer’s cutter and tear bar.
The print head is a thermal element and it is at
high temperature during printing or just after
operation. Therefore, do not touch it and its
peripherals for safety reasons.
The thermal head is an ESD-sensitive device. To
prevent damage, do not touch either its
printing part or connecting parts.
Caution:
Install the printer on a flat and stable place.
Reserve adequate space around the printer so that
convenient operation and main-tenance can be
performed.
Keep the printer away from water source.
Do not use or store the printer in a place exposed to
heat or fire, moisture, serious pollution and direct
sunlight.
Do not place the printer on a place exposed to
vibration or impact.
No dew condensation is allowed to the printer. In case
of such condensation, do not turn on the power until
condensation completely disappeared.
Only use power supply units and cables released by
Wincor Nixdorf.
Connect the printer to “UL Listed Computers” only.
Only connect cables to the 24V connector which are
marked with DP-1 or DP-2.
The printer should only be disassembled or repaired
by a technician who is certified by the manufacturer.
Further Information
Please find detailed information about the printer in the
Operator’s Guide. That document as PDF file and needed
drivers can be downloaded from this web site:
http://www.wincor-nixdorf.com
http://www.wincor-
nixdorf.com/internet/site_EN/E
N/Support/Downloads/POSLotte
rySystems/poslotterysystems_no
de.html
Consumables
Please order consumables at:
http://www.wincor-nixdorf.com/mediaservice
Copyright© Wincor Nixdorf Pte Ltd, 2015
The reproduction, transmission or use of this document or its
contents is not permitted without express authority.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration
of a utility model or design, are reserved.
Delivery subject to availability; technical modifications
possible.
Order No. 01750275431 C
To Previous Page
Loading...