Diesel DZ7130 - User Manual

DIGITAL GUIDE
- 1 -
Module BJ2679
DZ7187 DZ7188
(B) (D)
(A)
(C)
NORMAL TIME DISPLAY
1. Press A to change mode. Mode sequence is normal time, chronograph,
alarm, and time setting.
2. Press B for EL.
3. Press C to display date.
4. Press D to display alarm.
5. Press A+D to toggle chime on/off. (all days of week will display for “on”.)
6. Press C+D to toggle alarm on/off.
CHRONOGRAPH MODE
1. Press A to change to chronograph mode.
2. Press C to start/stop the chronograph.
3. Press D to reset to zero.
NOTE: Press A while the chronograph is running to return to normal
time display; chronograph will continue running.
SPLIT TIME
1. Press D while the chronograph is running for split time.
2. Press D again to measure multiple split times.
3.PressCtonalizetiming.
4. Press D to scroll through all counts.
5. Press D again to reset to zero.
ALARM SETTING
1.PressAtochangetoalarmsettingmode;hourwillbeginashing.
2. Press C to increase digit; press and hold C for fast advance.
3.PressDtoconrm.
4. Press D again to toggle to minutes.
5. Press C to increase digit; press and hold C for fast advance.
6. Press A to save data and return to normal time display.
NOTE: Alarm will sound at preset time for 60 seconds. Press D to
silence alarm, or press C for 5 minute snooze.
TIME AND CALENDAR SETTING
1. Press A to change to time and calendar setting; seconds will begin
ashing.
2. Press C to set seconds to zero.
3. Press D to advance to minutes.
4. Press C to advance digit; press and hold C for fast advance.
5. Press D to advance to next setting value.
6. Setting sequence is: seconds, minutes, hour, date, month, weekday.
7. Press D to exit setting mode.
NOTE: When setting the hour, “H” will be displayed for 24-hour format;
“A” or “P” for 12-hour format.
DZ7196 DZ7208 DZ7209
Module BJ2957
NORMAL TIME DISPLAY
1. Press A to change mode. Mode sequence is normal time, chronograph,
alarm, and time setting.
2. Press B for EL.
3. Press C to display date.
4. Press D to display alarm.
5. Press A+D to toggle chime on/off. (all days of week will display for “on”.)
6. Press C+D to toggle alarm on/off.
CHRONOGRAPH MODE
1. Press A to change to chronograph mode.
2. Press C to start/stop the chronograph.
3. Press D to reset to zero.
NOTE: Press A while the chronograph is running to return to normal
time display; chronograph will continue running.
SPLIT TIME
1. Press D while the chronograph is running for split time.
2. Press D again to measure multiple split times.
3.PressCtonalizetiming.
4. Press D to scroll through all counts.
5. Press D again to reset to zero.
ALARM SETTING
1.PressAtochangetoalarmsettingmode;hourwillbeginashing.
2. Press C to increase digit; press and hold C for fast advance.
3.PressDtoconrm.
4. Press D again to toggle to minutes.
5. Press C to increase digit; press and hold C for fast advance.
6. Press A to save data and return to normal time display.
NOTE: Alarm will sound at preset time for 60 seconds. Press D to
silence alarm, or press C for 5 minute snooze.
TIME AND CALENDAR SETTING
1. Press A to change to time and calendar setting; seconds will begin
ashing.
2. Press C to set seconds to zero.
3. Press D to advance to minutes.
4. Press C to advance digit; press and hold C for fast advance.
5. Press D to advance to next setting value.
6. Setting sequence is: seconds, minutes, hour, date, month, weekday.
7. Press D to exit setting mode.
NOTE: When setting the hour, “H” will be displayed for 24-hour format;
“A” or “P” for 12-hour format.
(B)
(D)
(A)
(C)
(for digital movement only)
Module BJ3101
DZ7178DZ7177 DZ7179
NORMAL TIME DISPLAY
1. Press A for EL.
2. Press A to display date.
TIME AND DATE SETTING
1.PressBtoentersettingmode;secondswillbeginashing.
2. Press A to set seconds to zero and return to normal time display.
3. Press B twice to set hour.
4. Press A to increase digit; press and hold A for fast advance.
5. Setting sequence is hour, minutes, month and date.
6. Press B to exit setting mode.
B
A
(for digital movement only)
DZ7197 DZ7198 DZ7199 DZ7200 DZ7201
Module BJ2718
(for digital movement only)
DZ7173 DZ7174 DZ7175
(B)
(D)
(A)
(C)
NORMAL TIME DISPLAY
1. Press A to change mode. Mode sequence is normal time, chronograph,
alarm, and time setting.
2. Press B for EL.
3. Press C to display date.
4. Press D to display alarm.
5. Press A+D to toggle chime on/off. (all days of week will display for “on”.)
6. Press C+D to toggle alarm on/off.
CHRONOGRAPH MODE
1. Press A to change to chronograph mode.
2. Press C to start/stop the chronograph.
3. Press D to reset to zero.
NOTE: Press A while the chronograph is running to return to normal
time display; chronograph will continue running.
SPLIT TIME
1. Press D while the chronograph is running for split time.
2. Press D again to measure multiple split times.
3.PressCtonalizetiming.
4. Press D to scroll through all counts.
5. Press D again to reset to zero.
ALARM SETTING
1.PressAtochangetoalarmsettingmode;hourwillbeginashing.
2. Press C to increase digit; press and hold C for fast advance.
3.PressDtoconrm.
4. Press D again to toggle to minutes.
5. Press C to increase digit; press and hold C for fast advance.
6. Press A to save data and return to normal time display.
NOTE: Alarm will sound at preset time for 60 seconds. Press D to
silence alarm, or press C for 5 minute snooze.
TIME AND CALENDAR SETTING
1. Press A to change to time and calendar setting; seconds will begin
ashing.
2. Press C to set seconds to zero.
3. Press D to advance to minutes.
4. Press C to advance digit; press and hold C for fast advance.
5. Press D to advance to next setting value.
6. Setting sequence is: seconds, minutes, hour, date, month, weekday.
7. Press D to exit setting mode.
NOTE: When setting the hour, “H” will be displayed for 24-hour format;
“A” or “P” for 12-hour format.
DZ7195 DZ7202 DZ7203 DZ7204 DZ7205

Summary

Module BJ2679

Normal Time Display

Instructions for basic time display, date, alarm, and chime functions.

Chronograph Mode

How to operate the stopwatch function, start, stop, and reset.

Split Time

Procedures for using the split time feature within the chronograph.

Alarm Setting

Steps to set the alarm time and use snooze functionality.

Time and Calendar Setting

Guide to setting the watch's time, date, and calendar format.

Module BJ2718

Normal Time Display

Instructions for basic time display, date, alarm, and chime functions.

Chronograph Mode

How to operate the stopwatch function, start, stop, and reset.

Split Time

Procedures for using the split time feature within the chronograph.

Alarm Setting

Steps to set the alarm time and use snooze functionality.

Time and Calendar Setting

Guide to setting the watch's time, date, and calendar format.

Module BJ2957

Normal Time Display

Instructions for basic time display, date, alarm, and chime functions.

Chronograph Mode

How to operate the stopwatch function, start, stop, and reset.

Split Time

Procedures for using the split time feature within the chronograph.

Alarm Setting

Steps to set the alarm time and use snooze functionality.

Time and Calendar Setting

Guide to setting the watch's time, date, and calendar format.

Module BJ3101

Normal Time Display

Instructions for basic time display and date.

Time and Date Setting

Steps to set the time, date, month, and year.

Module BJ3170

Normal Time Display

Instructions for basic time display, alarm, date, and chime.

Chronograph Mode

How to operate the stopwatch function, start, stop, reset, and return to normal time.

Split Time

Procedures for using the split time feature within the chronograph.

Alarm Mode

Instructions for selecting and setting the alarm.

Time and Date Setting

Guide to setting the watch's time, date, and calendar format.

Module FL075 AB

Display Modes

Explains the three different display views selectable by pressing A.

Setting Time;Date

Guide to setting year, month, date, 12/24hr format, hour, minute, and seconds.

Module FL137 AX

Normal Time Display

Instructions for cycling through time, calendar, and seconds displays.

Time and Date Setting

Procedure to enter setting mode and set year, month, date, and hour.

Module FL145 GR3

Overview

Highlights features like Dual Time, Chrono, Timer, Alarm, and EL backlight.

Light-Up EL

Instructions for activating the electroluminescent backlight.

Time of Day Mode

How to toggle between Time 1 and Time 2, set default, and manage key tone.

Chrono Mode

Instructions for starting, stopping, splitting, resetting, and recalling chronograph data.

Timer Mode

Details on timer modes (Count Down-Stop, Repeat, Up) and setting.

Timer Alarm

Information on the timer alarm sound.

Alarm Mode

How to select, enable, or disable the alarm.

Alarm Setting Mode

Steps to enter alarm settings and adjust values.

Module FL388 AB; Module QFL226

Overview

Highlights features like Dual Time, Chrono, Timer, Alarm, and EL backlight.

Light-Up EL

Instructions for activating the electroluminescent backlight.

Time of Day Mode

How to toggle between Time 1 and Time 2, set default, and manage key tone.

Chrono Mode

Instructions for starting, stopping, splitting, resetting, and recalling chronograph data.

Timer Mode

Details on timer modes (Count Down-Stop, Repeat, Up) and setting.

Timer Alarm

Information on the timer alarm sound.

Alarm Mode

How to select, enable, or disable the alarm.

Alarm Setting Mode

Steps to enter alarm settings and adjust values.

Module FL610

Normal Time Display

Instructions for changing modes and activating EL backlight.

Time and Calendar Setting

Guide to setting seconds, hour, minutes, year, month, and date.

Alarm Mode

How to enter alarm mode and toggle alarm/chime on/off.

Alarm Setting

Steps to set hour, minutes, month, and date for the alarm.

Time Zone 2

Instructions for changing to and setting Time Zone 2.

Countdown Timer

How to enter timer mode and use the countdown timer.

Timer Setting

Steps to set hour, minutes, and seconds for the timer.

Chronograph Mode

How to enter chronograph mode, start, stop, and reset.

Split Time

Procedures for using the split time feature within the chronograph.

Module FO-001

Normal Time Display

Instructions for changing display sequence to time, date, or seconds.

Time and Calendar Setting

Guide to setting month, date, hour, and minute.

Module G1;G3

Normal Time Display

Instructions for changing modes, toggling EL, chime, and time zone 2.

Recall Mode

How to view stored data like total time, best time, and lap times.

Alarm Mode

How to toggle alarm on/off and select between alarm 1 and alarm 2.

Alarm Setting

Steps to set hour, minute, and time zone for the alarm.

Countdown Timer

Instructions for using the countdown timer and its alarm.

Timer Setting

Guide to setting hour, minute, and seconds for the timer.

Chronograph Mode

How to change to chronograph mode, start, stop, and reset.

Lap Counting

Procedure for reading lap times during chronograph operation.

Module MLL-045

Normal Time Display

Describes automatic time display and toggling between time/date.

Time and Date Setting

Guide to setting 12/24hr format, hour, minutes, date, and month.

Personal Message Setting

Instructions for creating and setting a personalized message.

Module QAA-006;QAA-033

Normal Time Display

Instructions for EL backlight and changing modes (time, zone 2, alarm, timer).

Time and Date Setting

Guide to setting 12/24hr format, seconds, hour, minutes, year, month, date.

Time Zone 2

How to change to and set Time Zone 2.

Alarm Mode

How to change to alarm mode and toggle alarm/chime on/off.

Alarm Setting

Steps to set hour and minute for the alarm.

Countdown Timer

How to change to timer mode and start/stop the timer.

Timer Setting

Guide to setting hour, minute, and second for the timer.

Module QFL631

Normal Time Display

Instructions for time and date display, and message scrolling.

Time and Date Setting

Guide to setting 12/24hr format, hour, minutes, year, month, and date.

Message Setting

Instructions for entering and setting a message, character by character.

Module ZD0603 B01

Normal Time Display

Describes the display behavior when off, and entering time/date mode.

Time;Date Setting

Guide to setting 12/24hr format, minute, date, month, and year.

Diesel DZ7130 Specifications

General

Brand	Diesel
Model	DZ7130
Case Material	Stainless Steel
Band Width	24 mm
Movement	Quartz
Dial Color	Black
Display Type	Analog
Crystal	Mineral