Diesel G2 - 294704-0165 Injector Solenoid Valve Warranty Instructions

www.dieselsolenoid.com
Website : www.dieselsolenoid.com © 2024 Shenzhen Shumatt Technology Co., Ltd
6
/
14
1.9. 294704-0165 Injector Solenoid Valve Warranty Instructions
(1) Product Warranty Conditions And Instructions
It is necessary to provide pictures, videos, or test reports tested by the injector solenoid valve
inspection equipment when the injector solenoid valve is abnormal during use as evidence to feed back to
the salesman. Abnormal conditions are properly explained such as: 1.Smoke, 2. Engine shake, 3. Difficulty
starting the engine, 4. Engine noise, 5. Oil leakage etc.
(2) Injector Solenoid Valve Warranty Coverage
① After customer receives the F00RJ00841 injector solenoid valve within 15 days , if there is a
performance failure and the product has no damage on surface, customer can choose to replace it or repair
it;
② If the F00RJ00841 injector solenoid valve has performance problems during the warranty period (3
months), and it is confirmed to be product’s problems after being tested, you can contact our salesmen to
replace the same model or a reworked product with the same performance for free;
③ If the injector solenoid valve shell has obvious scratches, it can only be repaired and it will be returned
as it is if the product is confirmed to be fault-free.
Tips: For products not covered by warranty, our company can provide paid maintenance services. For
products after paid repaired, the same performance problem will have a free warranty period within 3
months from the date of repairing.
(3) Injector Solenoid Valve Is Not Covered By Warranty
1
The warranty period has expired.
2
Injector solenoid valve failure caused by high temperature, high pressure, humidity, rain and snow,
saline-alkali land, earthquake, and used in abnormal environment.
3
Customer disassembles or repairs the injector solenoid valve personally resulting in damage to
the injector solenoid valve.
4
Injector solenoid valve damage caused by man-made reasons (throwing, strong magnetic field
magnetization, set fire).
5
Injector solenoid valve failure or injector solenoid valve damage caused by non-injector solenoid
valve design, technology, manufacturing, quality and other issues.
6
Injector solenoid valve failure due to system pressure exceeding system approved pressure.
7
Injector solenoid valve failure caused by system voltage exceeding approved voltage.
8
Injector solenoid valve failure caused by impurities (water, lead, aluminum powder, iron powder,
sulfide) in the system fuel exceeding the standard requirements.
9
Injector solenoid valve failure caused by not installing according to the tightening torque specified
in the vehicle engine maintenance manual (the tightening torque is too large or too small).
10
Injector solenoid valve failure caused by not following the installation angle specified in the
vehicle engine maintenance manual.
11
Injector solenoid valve failure caused by not following the cleaning requirements specified in the
vehicle engine maintenance manual.
12
Injector solenoid valve failure caused by failure to replace consumable parts as specified in the
vehicle engine maintenance manual.
13
Injector solenoid valve failure caused by not complying with the intake system fit clearance and
exhaust system fit clearance requirements specified in the vehicle engine maintenance manual.
14
Failure to replace the consumable parts and the fitting clearance of the oil inlet system pipeline