3.2.4 Compensated Out
A frequency corrected signal will leave this jack if you connect it to a mixer
orrecording device. Use it to quietly compose or send an auxiliary signal to
aconsole etc. Always make sure that your amp is hooked to either a speaker or
a load (i.e. THD HotPlate).
3.2.5 Speaker Connections
Einstein has 5 speaker jacks. 1 for a 16Ohm load, 2 for 2 16Ohm loads or
1 8Ohm load, and 2 for 2 8 Ohm loads or 1 4 Ohm load. Confusing? Oh
yes! Just do what it says on the jacks, and you’ll be fine
To Next Page
Loading...
