coffee ground
spoon
coffee grounds
Particle Analysis Operation Diagram
Click to power up, put the main unit over the particle
analysis tray. Make sure the meganetic ports are
connected.
Swipe from left to right on READY page to enter the menu page. Click on the 'Particle' button to start
test. The screen will display result after complete.
Particle
TestingTesting
1 2
3
Medium
Ratio ：58%
Counts：174
（ISO）
Particle
980
μm
Roast
参数设置
Calibration
Use a coffee ground spoon to scoop an appropriate
amount of ground coffee into the center area of the
particle analysis tray.
13
To Next Page
Loading...