Setup
DIG’s BOHE-BT & BOHE-BTI Hose End Timers are the easiest Bluetooth® hose
end timers to set up and install.
• First, download the DIG BTT app using the iOS App Store, Google Play,
utilizing the QR code on the box, or from the DIG website.
• Once the app is installed, open the battery compartment cap on the timer by
turning it counter-clockwise.
• Install two, fresh, brand name, AA alkaline batteries (not included). The
proper negative and positive orientation is located on the underside of the
timer.
• Screw the battery cap back on clockwise until hand tight.
• Attach the timer inlet to the outdoor faucet/spigot or tab and turn clockwise
until hand tight.
• Attach a drip irrigation system or garden hose to the timer outlet and turn
clockwise until hand tight.
• Open the DIG BTT app from your smartphone or tablet and use the
instructions in the App Screens Overview to program and operate the timer.
App Controller/Timer Screen Overview
Controller Scanning Screen
• The DIG BTT app automatically scans for nearby timers when opened. Any DIG
Bluetooth timers within 50 feet (15 meters) line of sight will appear on screen.
Your new timer will appear as the BT Hose End Timer.
• Its picture, status (watering -on- or not watering -off-), connection strength, and
battery life, will appear alongside it.
• Tap on the timer to connect to it and start programming.
To Next Page
Loading...
