Thank you for purchasing DIG’s BOHE-BT or BOHE-BTI Bluetooth Hose End Timer
(Tap Timer). This manual describes how to get the timer up and running quickly. After
reading this manual and becoming familiar with the basic functionality of the timer,
use the manual as a reference for less common tasks in the future.
About the BOHE-BT
The BOHE-BT/BOHE-BTI Bluetooth Hose End Timer (Tap Timer) employs the latest
in Bluetooth technology using the free DIG BTT app for Android or iPhone. The app
can be used to control and program any number of timers for complete control of
an outdoor faucet irrigation system. The timer is powered by 2 AA batteries that can
last up to 1 year (using name brand alkaline batteries) and is enclosed in a compact,
waterproof housing to protect it from the elements.
Specification
• Operating pressure: 10 to 120 PSI (.7 to 8.3 bar)
• Temperature range: 38º-130º F (-2º to 54º C)
• Flow range: .1 to 6 GPM (.38 to 30 L/H)
• Power source: 2 AA alkaline batteries (not included)
• USA Connection: Female hose thread inlet (FHT) x male hose thread outlet (MHT)
• International Connection: British standard thread for tap (BSP)
• Dimensions: 5.5″ x 3.1″ x 4.3″ (14 cm x 7.9 cm x 11 cm)
• Weight: 8 oz. (227 g)
Component Identification
Timer inlet 3/4″ female
hose thread or BSP
Battery
compartment cap
for 2 AA batteries
1 button for
manual run
and reset
Timer outlet 3/4″
male hose thread
or BSP
To Next Page
Loading...
Need help?
General
