Digatron DT-50S User Manual

F. Playback
E. Maximums by Lap
4.
POW ER
EXIT
Return to monitor / record mode.
Select a lap. See D. Lap Times.
1.
3.
OR
Changes lap backward or forward one.
Displays flash when your best lap is
shown.
LIGHT
SET UP
Displays engine data,
showing maximum
values for this lap.
2.
MAX
E
N
G
I
N
E
2A.
Displays lap data.
Press and hold to
view Event
number.
EVENT
T
I
M
E
2.
Press to view engine data.
Select a lap. See D. above.
1.
3.
PAUSE
PLAY
Begins playback of selected lap. Pause and
resume playback with each press.
If paused, steps through data in 0.1 second increments.
If not paused, press and hold to fast forward.
4.
SE
MAX
E
N
G
I
N
E
T UP
POW ER
EXIT
7.
Press once to return to D. Maximums by Lap. Press
again to return to monitor/ record mode.
If paused, reverse steps through data in 0.1 second
increments. If not paused, press and hold to reverse.
LIGHT
5.
Press and release to
cycles through up to
three sets of engine
data.
6.
MAX
E
N
G
I
N
E
6A.
Displays lap data.
EVENT
T
I
M
E
G. Reset (clear memory)
1.
PAUSE
PLAY
And
SET UP
Press at same time.
2.
PAUSE
PLAY
Press when display flashes. Aborted if not pressed
within 10 seconds.
H. Power Off
The instrument will turn off automatically if it does not receive
any button presses or a tach signal.
1.
POW ER
EXIT
Turns instrument off if it is not recording or receiving
a tach signal.
OR

Digatron DT-50S Specifications

General

Brand	Digatron
Model	DT-50S
Category	Measuring Instruments
Language	English