SPECIFICATIONS
Audio inputs
Analog line inputs
• 2 balanced analog line inputs (can be used with unbalanced signals).
• switch selection of maximum input level : +22dBu (Line /+8dBu (CD)
• switch selectable input impedance: 600Ohms or >10 kOhms
• 24 bits analog to digital converters (64 x oversampling delta-sigma)
• input level adjustment: software control
Digital inputs
• 1 AES/EBU or S/PDIF. Transformer coupled for sync or for record (24 bits
available).
• 1 AES/EBU or S/PDIF. Transformer coupled for record only (24 bits
available). Sync must be provided by digital input #1.
Audio outputs
Analog outputs
• 2 balanced analog outputs (can be used as unbalanced).
• maximum level: +22dBu (software adjustable)
• output impedance < 100Ohms.
• 24 bit digital to analog converters (64 x oversampling delta-sigma).
• output level adjustment: down to - 91.5dBu by 0.5dB steps.
Digital output
• 1 AES/EBU or S/PDIF. Transformer coupled (24 bits available).
• synchronization with digital input complies with AES 11
Headphone output
• 3.5mm TRSstereo jack
Processing
Processing power is provided by a Motorola 56002 DSP associated with
384 kbytes of high speed RAM.
Digigram
6
To Next Page
Loading...
