Digikeijs DR100 User Manual

5
www.digikeijs.com
DR100/DR110 28cm led strip (yellow/white/warm white)
Adjusng brightness
All colour versions of the DR110 have an adjustable brightness by means of a miniature
potenometer (5). This can be turned with a small screwdriver to adjust the brightness.
Do it yourself an blink soluon
Why?
It is possible to t an extra capacitor per voltage group yourself. An extra capacitor provi-
des a larger current buer and prevents the LED strip from ashing if the track contact is
poor.
PLEASE NOTE: Your warranty will be voided by carrying out this an-blinking soluon.
Requirements
Electrolyc capacitor with a minimum capacity of 220uF and a minimum voltage of 16
Volt. (2 capacitors are required for the complete strip).
Arcle number: DR60023 to DR60026 (dierent numbers per package) see also overview
on page 7.

Digikeijs DR100 Specifications

General

Brand	Digikeijs
Model	DR100
Category	Lighting Equipment
Language	English