Digilock Next lock Sola User Manual

Horizontal Right Handed
Locked Position Unlocked Position
Horizontal Left Handed
Locked Position Unlocked Position
Vertical
Locked Position Unlocked Position
Lock Base Seal
Nut
Flat Washer
Flat Washer
Nut
Cam Stop*
*Refer to section on Cam
and Cam Stop Position
Cam
Sola Lock
Flat Washer
Philips Screw (M5 Pan Head)
Star Washer
Lock Base Seal
Flat Washer
Nut
Flat Washer
Nut
Star Washer
Cam Stop*
*Refer to section on Cam
and Cam Stop Position
Cam
Philips Screw
(M5 Pan Head)
Sola Lock
Flat Washer
Philips Screw (M5 Pan Head)
Star Washer
Lock Base Seal
Flat Washer
Flat Washer
Nut
Star Washer
Cam
Philips Screw
(M5 Pan Head)
Sola Lock
Flat Washer
Star Washer
Philips Screw (M5 Pan Head)
11-14mm Door
14-18mm Door
18-22mm Door
Cam Stop*
*Refer to section on Cam
and Cam Stop Position
1) Remove battery cover. 2) Pull battery carrier out. 4) Replace battery carrier along
with cover and secure.
3) Replace with 2 AAA batteries.
Cam throw: right
Locked Position Unlocked Position
Cam throw: left
Locked Position Unlocked Position
Cam throw: bottom
Locked Position Unlocked Position
Cam throw: top
Locked Position Unlocked Position
Cam throw: top
Locked Position Unlocked Position
Cam throw: bottom
Locked Position Unlocked Position
blue
black
yellow
User Key Manager Bypass Key* Programming Key**
Operates the lock
● ● ●
Overrides user access
● ●
Allows access for management inspection
● ●
Provides external power
● ●
Assigns user credential
●
Sets lock functionality
●
*Up to 25 Manager Bypass Keys may be registered to a lock.
**1 Programming Key allowed per lock group.
Key logo facing
to the right
Key logo facing up
Key logo facing
to the left
Vertical
VerticalHorizontal Left Handed Horizontal Right Handed
Back-View
Horizontal Left Handed
Back-View
Horizontal Right Handed
Back-View
Door thickness: 0.1–5mm (.01”-.197”)
Use upper nut hardware
Door thickness: 6-10mm (.236”-.394”)
Use upper screw hardware
Door thickness: 11-22mm (.433”-.866”)
Use upper screw hardware
Lock Orientation - Views
SOLA can be installed vertically or horizontally for left or right handed configuration.
Hardware & Mounting
Keys
Key Insertion
Battery Replacement
Cam & Cam Stop Position
Note:
The position of the cam and cam stop varies depending on whether it is vertically
or horizontally installed for a left or right handed configuration.
IMPORTANT:
Do not operate and turn the handle to the unlocked position without first installing
the lock or determining whether the lock is for a left or right handed configuration.
KEY MANAGED

Digilock Next lock Sola Specifications

General

Operation	Electronic
User Interface	Keypad
Lock Type	Deadbolt
Power Source	4 AA batteries
Backlight	Yes
Mounting Type	Surface mount
Power	Battery-powered

Summary

Hardware & Mounting

Door Thickness Mounting Hardware

Details mounting hardware for various door thicknesses from 0.1mm to 22mm.

Key Types and Functions

Explains User, Manager Bypass, and Programming Keys and their operations.

Key Insertion Guide

Illustrates correct key insertion for different lock orientations.

Lock Orientation and Views

Shows how the SOLA lock can be installed vertically or horizontally.

Cam and Cam Stop Positions

Details the positioning of the cam and cam stop based on installation orientation.

Battery Replacement

Programming Instructions

Default Settings and Initial Setup

Configures default settings and performs the initial setup for the lock.

Express Register Keys

Efficiently registers Manager Bypass Keys to multiple locks.

Register/Add Manager Bypass Keys

Details the process of registering or adding Manager Bypass Keys to a lock.

Set Lock Functionality

Configures the lock for shared or assigned use functionality.

Assign User Credentials

Assigns user codes or keys for assigned use functionality.

Lost or Stolen Keys

Lost or Stolen Programming Key

Procedures for handling a lost or stolen Programming Key.

Lost or Stolen Manager Bypass Key

Procedures for managing lost or stolen Manager Bypass Keys.

Operating Instructions

Shared Use Operation

How to operate the lock using shared use functionality.

Assigned Use Operation

How to operate the lock using assigned use functionality.