Need help?Do you have a question about the Digiplex EVO641 and is the answer not in the manual?
General| Model | EVO641 |
|---|---|
| Type | LCD Keypad |
| Backlight | Yes |
| Communication | Wired |
| Power Supply | 12V DC |
| Display | LCD |
| Keys | 12 |
| Compatibility | Digiplex EVO series |
Explains symbols used for warnings, tips, and key presses in the manual.
Explains confirmation and rejection beep tones for keypad feedback.
Describes programming keypads to hide system status automatically.
Explains how to view the status of individual areas in a partitioned system.
Explains the timer allowing exit after arming the system.
Describes the standard method for arming the system.
Explains partial arming for remaining inside the premises.
Describes arming without entry delay, triggering immediate alarms.
Explains how to arm the system with open zones.
Details how to ignore specific zones during arming.
Explains how to reinstate previously bypassed zones.
Lists features accessible via dedicated buttons without a code.
Describes automatic arming at a programmed time.
Explains automatic arming based on inactivity in an area.
Explains the delay for disarming upon entering.
Details the process for disarming an armed system.
Explains how to view past alarm events.
Explains the master code for system administration and security.
Describes copying user settings, access control, and area assignments.
Explains how to assign personalized labels to user access codes.
Explains the function of keys like STAY, FORCE, ARM, DISARM, BYP, MEM.
Describes methods to enter and exit through access control doors.
Explains arming and disarming using access cards.
Explains how to view and interpret system trouble messages and codes.
Details system-related troubles like AC Failure, Battery Trouble, and Bell Absent.
Lists communicator issues like TLM1 and Fail to Communicate.
Explains how PGMs trigger events for various system functions like alarms or lights.
Details how to adjust keypad settings like scrolling speed, backlight, and contrast.
Instructions for adjusting the illumination brightness on LED keypads.
Steps to reset the system's time and date.
Instructions for accessing the VDMP3 from an external line to control the system.
Explains how to handle calls received from the VDMP3 during an alarm event.
Procedure for testing burglar alarm functionality involving two operators.
Guidelines for testing fire detection devices safely.
General recommendations for system upkeep and battery replacement every three years.
Steps to conduct a comprehensive system test, often weekly.
Explains the behavior of standard fire zones during an alarm and silencing.
Details the delay mechanism for delayed fire zones before contacting monitoring.
Provides advice on preparing for and acting during a fire emergency.
To Next Page