Digital Flash Memory MP3 On-Hold - Player Set-up; Connection to Analog Phone Lines; Combined Line Connection; Player Volume Adjustment

3./4
1
/2
/3
8
Ω
16
Ω
POWER
O
N
O
F
F
9V DC
USB
AUDIO OUT
IMPEDANC
E
PHONE LINE
S
memory car
d
sp
ea
ke
r
o
n
of
f
5
9
2
MP3 On-Hold Audio System MP3 On-Hold Audio System
Player Set-up
Plug the supplied "T adapter" into any modular phone jack which services line 1 and 2.
(This will allow you to share the phone jack with any phone extension which you have plugged in to the wall jack.)
Plug the provided phone cord into the jack marked "Line 1/2/3" on the back of the player.
Plug the other end of the phone cord into the "T" adapter which is servicing line 1 and 2.
REPEAT ABOVE IF LINE 3 and/or 4 ARE PRESENT.
NOTE:
One MP3 On-Hold Audio System will provide on-hold audio capability to all phone extensions
in your office.
IMPORTANT! - Player volume adjustment
Adjust the player's volume control to the half way point before proceeding to the next step.
Excessive volume will cause the on-hold audio to shut off during playback.
1
2
3
Connection to analog phone lines
Combined Line Connection
Lines 1 & 2 are combined in one wall jack and lines 3 & 4 are combined in another wall jack
step
1
Line 1/2 Line 3/4Line 3/4
9
Page left blank