Web Power Switch 7
digital-loggers.com
12
suggested for server applications. This delay value is also used in
the Cycle function.
You may also enter a screen refresh delay in this section. If
Enable screen refresh is checked, and a delay value is entered,
your browser should periodically update the status screen.
Wrong Password Lockout
After three failed login attempts, the switch can disable access for
a selected period of time (0-60 Minutes).
Power Loss Recovery Modes
The power loss recovery mode setting has three settings which
take effect after a power failure:
1. You can turn all outlets off (all systems will be switched off
until manually turned on later).
2. You can automatically turn all outlets on using the All ON
sequence delay timer described above.
3. You can return to the same outlet settings that were
used prior to the power loss. ie. 1 On, 2 Off, etc. The ON
Sequency delay timer is used.
Note: If you have written a script and enabled scripting, the script
will start automatically on power up at LINE 1.
User Defi ned Links
You may link to other power controllers, your own web pages, or
remote web sites by entering up to four URLs and descriptions in
the Setup page. For example, enter “Site Two Power Controller”
in the description fi eld with a URL of “192.168.0.250” These links
appear on the home page.
Access Control
The administrator can restrict user permissions to certain outlets.
To Next Page
Loading...