Web Power Switch 7
digital-loggers.com
4
Important Factory Defaults
DEFAULT IP ADDRESS
The factory default is 192.168.0.100
DEFAULT ADMINISTRATOR LOGIN
User name: admin (lower case)
Password: 1234
To reset the IP address and admin login to factory defaults, gently
press the reset-to-defaults button to the left of the LCD.
Note: Reset-to-defaults sets the admin login and IP address, but
it doesn’t affect outlet names, links, and stored scripts. Auto-Ping
and auto-start of custom scripts are disabled.
Quick Setup
Use these shortcuts if you are an experienced installer. If this is
your fi rst time, please skim the entire manual fi rst.
1. Remove the switch from its shipping carton. Save the
carton and packing for future hardware upgrade.
2. Attach the power cord to a protected power source with a
capacity of at least 15 amperes.
3. Attach the cable from the controller to a port on your
To Next Page
Loading...