DigitalZone HDMI 208L - Specification; Troubleshooting for no Power

NEXD HDMI Splitter
2
6
Specification
Input 2EA HDMI Type A
Output
8EA Default (Model: HDMI 208L)
4EA Optional (Model: HDMI 204L)
User Interface
Remote Control IR (Option)
RS232 Remote PC/ Device
LED
POWER : On / Off
SYNC : Indication of valid input signal
HDMI: Input signal is HDMI or DVI
HDCP: HDCP being used
EE : EDID Emulation being used.
Buttons
Touch sensors
POWER
Selectable Input 1 ~ input 2
Selectable function F1~F4
Power +12V/ 3A DC Jack
Firmware Upgrade Yes Mini-USB B type connector
HDMI Version 1.3
Deep Color
Higher refresh rate (~120hz)
Colorimetry RGB / YCbCr / xvYCC
CEC Yes Auto switching
EDID Emulation EDID Emulation mode supporting
Troubleshooting for no power
- Check if LED light on the front is turned on.
- Make sure the power cord connectors on both ends are firmly attached.
Please refer to the webpage, www.dzonei.com
for more detailed information
for the troubleshooting