DigitAx User Guide
Issue code: dgxu4
2-2 Safety information
Before connecting the AC supply to the Drive, it is
important that you understand the operating
controls and their operation. If in doubt, do not
adjust the Drive. Damage may occur, or lives put at
risk. Carefully follow the instructions in this User
Guide.
Before making adjustments to the Drive, ensure all
personnel in the area are warned. Make notes of all
adjustments that are made.
2.7 Risk analysis
In any application where a malfunction of the Drive
could lead to damage, loss or injury, a risk analysis
must be carried out, and where necessary, further
measures taken to reduce the risk. This would
normally be an appropriate form of independent
safety back-up system using simple electro-
mechanical components.
2.8 Motor
Ensure the motor is installed in accordance with the
manufacturer’s recommendations. Ensure the
motor shaft is not exposed.
2.9 Adjusting parameters
Some parameters have a profound effect on the
operation of the Drive and protection of the motor.
They must not be altered without careful
consideration of the impact on the controlled
system. Measures must be taken to prevent
unwanted changes due to error or tampering.
To Next Page
Loading...
Need help?
General
