DIGITECH Audio 240WRMS

To Next Page

AMP Component

AA-0520

User Manual

SPECIFICATIONS

Output Power:

Input Impendence:

InputSensitivity:

Signal-to-Noise:

Total Harmonic Distortion(1KHz):

Frequency Response:

Power Input:

Audio Input:

Audio Output:

Weight:

Dimensions:

120W +120WRMS Max (4 Ohms)*

47k Ohm

300mV

≥80dB

≤0.5%

20Hz-20KHz±2dB

240VAC @ 2A Max.

Dual Stereo RCA Sockets

1 x Stereo RCA Sockets

3.5kg

250(W) x 240(D) x 90(H)mm

1. Power Button

2. Headphone Signal Output

3. Volume

*The minimum allowable speaker impedance is 4 Ohms, which gives the maximum rated

power of 120 Watts per channel. It will work perfectly well with higher impedance

speakers such as 8 Ohms, it's just that the maximum power will be reduced. With 8 Ohms

you will only get 60 Watts per channel, 6 Ohms you would get about 80 Watts per channel

and so on.

Need help?

Do you have a question about the DIGITECH Audio 240WRMS and is the answer not in the manual?

Summary

Specifications

Output Power

Maximum rated power output of the amplifier per channel at a specified impedance.

Input Impedance

The resistance presented by the input terminals to the source signal.

Input Sensitivity

Minimum input voltage required for the amplifier to produce its rated output power.

Signal-to-Noise Ratio

Ratio of desired audio signal power to background noise power.

Total Harmonic Distortion

Measure of unwanted harmonic frequencies introduced by the amplifier's operation.

Frequency Response

Range of audio frequencies the amplifier can reproduce with specified accuracy.

Power Input

Electrical power requirements for operating the amplifier.

Audio Input Type

Type of audio connectors supported for input signals.

Audio Output Type

Type of audio connectors supported for output signals.

Weight

Physical weight of the audio component.

Dimensions

Physical size specifications (width, depth, height) of the component.

Connections

Auxiliary Inputs

Describes the auxiliary audio input ports for connecting external sound sources.

Line Output

Details the line-level audio output port for connecting to other audio devices.

AC Power Input

Specifies the port for connecting the AC power supply to the amplifier.

Fuse Holder

Indicates the location of the fuse for electrical protection.