15
Global Parameters
MIDI Channel Select:
This parameter allows you to select the MIDI channel which ACCESS will look at to generate
harmony information on Chords or Notes presets, as well as Control Change information. MIDI
Channels 1 through 16 can be selected.
MIDI Program Change on/off:
This parameter allows you to set ACCESS to ignore or accept MIDI Program Change messages.
When set to “ON” ACCESS will accept program change information. When set to “off”,
ACCESS will ignore program change information.
Keyboard Zone:
This parameter allows you to set where on your keyboard where you play to trigger harmonies
on Chords or Notes presets. It is useful when you don’t want your whole keyboard to trigger har-
monies. There are two items you can edit for this parameter. With this parameter you specify a
note on your keyboard and whether the notes above or below it will trigger harmonies. If Zone is
set to “Below”, then notes below the selected note will trigger harmonies. If Zone is set to
“Above”, then notes above the selected note will trigger harmonies. The zone note can be select-
ed from “C -1” to “G 9”. The letter represents the note, the number represents the octave.
Note: If this is set outside a useful range e.g. below C1, keyboard control will not work.
ScaleSmooth on/off:
This parameter switches harmony note pitch correction on and off when using Scale presets.
When ScaleSmooth is set to “off”, the all harmony voicings except the Bass and Double will
jump to exact pitches. When ScaleSmooth is set to “ON” harmony notes follow your exact pitch
To Next Page
Loading...
Need help?
General
