EasyManua.ls Logo

DigiTech AR 1946 - Software Version

DigiTech AR 1946
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SOFTWARE VERSION
The user can check software version and also the software may vary:
1) In DAB mode, quickly press “MENU” button then rotate tuning knob or press
“UP” button to select “VERSION”;
2) Quickly press “ENTER” button to display software version ;
LINE IN/LINE OUT OUTPUT
In radio on, connect external audio source to LINE IN JACK(right side of unit),
LCD displays “AUX IN, the audio output from speaker is an external source.
The Line-out socket can be used to feed audio from the radio to amplified external
speakers. The internal speaker will still be functional when a device is connected
to the Line-out socket.
16
3) Quickly press “MENU” button again to exit current operation ;
USING EARPHONE JACK
The earphone jack can be used with stereo headphones using an 1/8 inch
(3.5mm)plug. FM sound is in stereo if the signal is sent in stereo and the ST
position is selected with the “AM BW/FM ST” switch. The internal speaker
will be muted when a device is connected to the Earphone jack.
USING VOLUME UP/DOWN
Quickly press volume (V+/V-) button to adjust volume UP or volume
DOWN step by step. Press and hold down volume (V+/V-) button to
adjust volume UP or DOWN continuously.

Related product manuals