OPERATING INSTRUCTION
POWER SUPPLY
AC Adaptor Operation
Insert one end of the AC adaptor to the Micro-B DC socket (Location 18) of the unit, and the other end to the power
supply. The unit will be automatically in standby mode when connecting to AC power.
If a 3.7V Li-ion 18650 rechargeable 1,500mAh battery (Optional item) is inserted inside the battery compartment
(Location 21), it will be charged up automatically when the unit is connecting to AC power.
To disconnect the set from the AC supply completely, withdraw the AC adaptor from the wall outlet.
DC (battery) Operation
1. To operate your unit on batteries, the AC adaptor must be disconnected from the unit and Wall outlet. If not, the
unit will be operated by AC power, instead of DC batteries.
2. Insert 3 batteries, type R14, UM2 or C cells (not included) into battery compartment and then close the
compartment cover (Location 21).
Notes
Check your batteries regularly. Old or discharged batteries should be replaced. If the unit is not to be used for
sometime or is being run exclusively on AC electrical current, remove batteries from the battery compartment to
avoid leakage.
Warning: Before using the unit, check that the local mains supply is compatible with the unit. Do not plug or unplug
the power cable when your hands wet.
When planning not to use the unit for long periods of time (i.e. vacation etc.) disconnect the plug from the wall
outlet.
Normal Operation
1. Press POWER to switch on the radio.
2. Press MODE once or more to select FM waveband.
3. The display shows the radio station details throughout the radio mode.
4. Select your station by using PREVIOUS ( ) or NEXT ( ).
5. Adjust the sound with VOLUME+ or VOLUME-.
6. To switch to standby mode, press POWER once.
Setting Time
Insert the adaptor plug into the DC socket located on the rear of your radio. During this time, the radio is scanning
to find a DAB radio signal. After a short time the current time will appear on the display. If no signal is found, the
time cannot be set. It may be necessary to relocate your radio to a position giving better reception.