Attentions
1. Please be sure to turn off the power before installing or removing the display, otherwise it
may cause permanent damage to the display;
2. When fix the display to the e-bike, please ensure that the torque of the screwdriver is about
0.5Nm (DO NOT EXCEED 0.6Nm), Excessive torque will cause damage to the display
structure;
3. Do not immerse the display into water;
4. The display can be wiped with wet and soft cloth, but DO NOT use any chemical liquid or
spray on the display;
5. Do not use the USB charging function when riding in the rain, and make sure the USB plug is
closed.
6. Please abide by local laws and regulations when scrapping, discard or recycle in an
environmentally friendly way, and do not discard the display or any accessories as resident
waste;
7. The damage and failure of the display caused by improper installation or use are not covered
by the after-sales warranty;
8. For more information and support, please contact support@riding-evolved.com.
To Next Page
Loading...
