Shenzhen Digitech Co., Ltd. BN136 Manual
Shenzhen Digitech Co., Ltd. www.riding-evolved.com
Attentions
1. Please make sure to turn off the power before the device is connected, otherwise it causes
device damaged permanently;
2. ；Please make sure to fix the inner hexagon screws with torsion value 0.5Nm (maximum
torsion value less than 0.6Nm), otherwise it causes device damaged;
3. The device is not permitted to soak in water;
4. Please use soft wet cloth to wipe the surface and clean the device, DO NOT use or spray
any chemical liquid;
5. The USB port is NOT waterproof. Please make sure the protective rubber plug is tucked
tightly during riding in the rain. It’s forbidden to connect external devices in the rain;
6. Please scrap the device abide by local laws and regulations, discard or recycle in an
eco-friendly way. Please do not discard device or any accessories as residents’ garbage;
7. Improper installation, human damage and failure are not covered by the after-sale
warranty.
8. Please contact support@riding-evolved.com for pre-sale and after-sale matters.
To Previous Page
Loading...
