3
OPERATION INSTRUCTIONS:
Power On/Off:
Long-press the Power button to turn the speaker on and off.
Bluetooth:
1. Bluetooth will automatically turn on when the unit is powered up.
2. Turn on Bluetooth on your Mobile/Bluetooth device and search for “CS2602”
then connect to it.
3. Play music from your Mobile/Bluetooth device.
4. Long-press the Forward or Backward button on the device to skip or
repeat music.
5. Short-press the Forward or Backward button to adjust volume up and down.
6. Short-press the Play/Pause button on the device to play/pause music.
7. Long-press the TWS button to disconnect the Bluetooth connection with your
Mobile/Bluetooth device.
TWS Function:
1. Turn on two identical speakers you want to pair, both under BT mode. Only
need to set up one of the two units.
2. Short-press the “TWS” button to pair. The TWS button will remain lit up after
pairing successfully.
3. To achieve a more intense surround sound impression, use your Bluetooth
device to play music through the two linked Speakers.
4. Short-press the “TWS” button again to exit TWS mode.
RGB Light:
The RGB light is on when the speaker is powered on. Users can short-press the RGB
Light button to turn on the three different light modes and then turn it off.
To Next Page
Loading...