DigiTech GE4107 User Manual

12
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO
EITHER CD, AUX OR TUNER FIRST. UN-PLUG IT BY PULLING OUT THE USB/CD SOCKET DIRECTLY.
COMPACT DISC (CD) PLAYBACK & ENCODING
1. PRESS FUNCTON BUTTON TO “CD” MODE.
2. PRESS CD OPNE/CLOSE BUTTON, CD DOOR WILL BE OPENED, PUT THE CD IN THE TRAY AND PRESS CD
OPNE/CLOSE BUTTON AGAIN, CD DOOR WILL BE CLOSED.
3.THE SYSTEM WILL START READING THE CD:
l PLAY / PAUSE BUTTON
- PRESS THE PLAY/PAUSE BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO CONTINUE.
l STOP BUTTON
- PRESS THE STOP BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE TOTAL
NUMBER OF TRACKS. AND THEN USER CAN PRESS SKIP UP OR SKIP DOWN BUTTON TO
SELECT TRACKS.
l SKIP UP / SKIP DOWN BUTTON
- DURING CD PLAYBACK, PRESS SKIP UP BUTTON ONCE TO PLAY THE NEXT TRACK. PRESS AND
HOLD SKIP UP BUTTON CONTINUOUSLY TO SPEED UP SELECTING FORWARD.
- DURING CD PLAYBACK, PRESS SKIP DOWN” BUTTON ONCE TO PLAY THE PREVIOUS TRACK.
PRESS AND HOLD SKIP DOWN” BUTTON CONTINUOUSLY TO SPEED UP SELECTING BACKWARD.
-
l FOLDER SEARCHING
PRESS ALBUM DOWN OR ALBUM UP TO SEARCH FOLDER BACKWARD OR FORWARD.
l REPEAT FUNCTION
DURING AUDIO PLAYBACK, PRESS MODE BUTTON ONCE, SINGLE TRACK WILL BE PLAYED REPEATEDLY.
PRESS MODE BUTTON (5) AGAIN, IT WILL REPEATEDLY PLAY ALL TRACKS IN THE WHOLE CD.
TRACKS PROGRAMMING
UP TO 60 MP3 TRACKS & 30 CD AUDIO FORMAT TRACK CAN BE PROGRAMMED AND PLAYED IN ANY ORDER.
BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:
1. PRESS FUNCTON BUTTON TO “CD” AND AT STOP MODE
2.PRESS THE MODE BUTTON, “MEM” WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE
PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3.SELECT A DESIRED TRACK BY PRESSING SKIP UP OR SKIP DOWN BUTTON. FOR MP3/WMA
DISC, PRESSING ALBUM DOWN OR ALBUM UP TO SEARCH FOLDER BACKWARD OR FORWARD.
4.PRESS THE MODE BUTTON TO STORE THE TRACK INTO MEMORY.
5.REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6.WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS PLAY/PAUSE BUTTON TO PLAY
THE TRACKS IN ASSIGNED ORDER.
7. PRESS STOP BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP BUTTON
AGAIN TO CANCEL PROGRAMMING.
CD RECORDING TO USB/SD
- THE SYSTEM ALLOWS YOU TO COPY THE TRACK FROM CD TO USB OR SD BY 1 TRACK, 1 FOLDER OR
ALL FILES.
- MP3/WMA FILE WILL BE COPIED IN HIGH SPEED FROM CD TO USB/SD DURING STOP MODE.
I) COPY 1 TRACK
1.INSERT THE USB STORAGE MEDIA OR SD/MMC CARD, PRESS FUNCTON BUTTON TO “CD” MODE.
2.PRESS REC BUTTON DURING THE PLAYBACK OF THE COPYING TRACK FROM CD, THEN “ONE” WILL BE
FLASHING ON THE DISPLAY. PRESS REC BUTTON AGAIN TO CONFIRM.
3.THE USB OR SD ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
4.AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
5.DISPLAY WILL SHOW “END” AND BACK TO CD MODE.

DigiTech GE4107 Specifications

General

Brand	DigiTech
Model	GE4107
Category	Turntable
Language	English