DigiTech GSP1101 - Software and System Requirements

Footswitch Input: DigiTech FS300 or GNXFC. Uses 1/4” TRS
stereo cable.
Power Requirements:
USA and Canada: 120 VAC, 60 Hz
Japan: 100 VAC, 50/60 Hz
Europe: 230 VAC, 50 Hz
UK: 240 VAC, 50 Hz
Power Consumption: 22 Watts
USB:
2.0 compliant
Audio streaming: 2 channels to computer, 2 channels from
computer
Sample rate: 44.1 kHZ
Unit Dimensions: 19” x 1.75” x 7.5” (W x H x D)
Shipping Dimensions: 22.25” x 11.5” x 3.5”
Shipping Weight: 7.5 lbs
Software System Requirements:
Windows
Windows® XP (SP 2 installed, .NET Framework 2.0* installed)
800 MHz processor speed (1.2 GHz recommended)
512MB RAM (1GB recommended)
*.NET 2.0 will be downloaded and installed during installation of X-Edit software if required.
Mac
OS 10.4.x
PowerPC or Intel® G4, G5 processor 800 MHz (1.2 GHz recommended)
512MB RAM (1GB recommended)
DigiTech engineers are constantly working to improve the quality of our products.
Specifications are therefore subject to change without notice.
Specifications

GSP0 Owner’s Manual