5
What Does This Do?
1. DC Power Output - This jack is a power output for providing
additional power to other pedals. Connect the HardWire HV-5 five
pedal power cable to this jack and use the Harman PS0913DC power
adapter to power 5 additional HardWire pedals.
NOTE: Do not power other pedals with the HT-6 Tuner when using battery power!
2. DC Power Input - Connect the optional Harman power supply to
this jack. Use the proper supply for your area’s mains line voltage.
3. USB Jack - This jack is used for updating the pedal’s firmware.
To Next Page
General