Need help?Do you have a question about the DigiTech HARDWIRE HT-6 and is the answer not in the manual?
Essential safety guidelines to follow for proper and safe operation of the apparatus.
Provides additional power to other pedals when connected.
Connection point for the optional Harman power supply.
Used for updating the pedal's firmware.
Displays polyphonic and single note tuning states.
Indicates when a Bass Display Mode is selected.
Connects the instrument and enables battery power.
Selects between Normal and Strobe display modes.
Shows the played note and Fret Offset status.
Activates and deactivates the tuner function.
Pins used to release the foot switch for battery access.
Selects tuning options and accesses tuning references.
Connects to amplifier or the next pedal in the signal chain.
Indicates when Guitar Standard tuning is selected.
Indicates when Drop D tuning for guitar is selected.
Tips for resolving issues when using polyphonic tuning mode.
Displays tuning status using static LEDs for each string.
Displays tuning status using moving LEDs indicating pitch direction.
Tips for resolving issues when tuning individual strings in Normal mode.
Tips for resolving issues when tuning individual strings in Strobe mode.
Instructions for automatically setting the fret offset using a capo.
Instructions for attaching the pedalboard pad to the pedal.
Instructions for applying the glow sticker to the foot switch.
To Next Page
General