24
Using the HT-6 to Power Other Pedals
The HT-6 Tuner has the ability to power other pedals in your pedalboard using
an optional multi pedal power cable. To use this feature, follow these steps:
1. Connect the optional power adapter to the HT-6 Tuner’s DC Power
Input jack.
2. Connect one end of the power chain multi pedal power cable to the
HT-6 Tuner’s DC Power Output jack.
3. Connect your other pedals to the available multi pedal power cable.
NOTE: Do not power other pedals with the HT-6 Tuner when using battery power! When using
the optional power adapter, the total current draw of all connected pedals should not exceed 1 A.
Consult your other pedal’s power requirements and make sure they can be connected to the HT-6
Tuner in this manner. Failing to do so may cause damage to your other pedals and the HT-6 Tuner.
To Next Page
Loading...