Need help?Do you have a question about the DigiTech MIDIEQ and is the answer not in the manual?
General| Frequency Range | 20Hz - 20kHz |
|---|---|
| Type | Parametric Equalizer |
| Channels | 2 |
| Cut/Boost | ±12 dB |
| Signal to Noise Ratio | >90 dB |
Turns the MEQ on and off, resuming the last program state.
Recalls the currently displayed program number onto the EQ bar graph.
Stores the displayed EQ curve into the current program number.
Adjusts the input level for each channel, serving as a headroom indicator.
Toggles the EQ in or out of the signal path, indicated by LEDs and display.
Procedure to set input gain using the LEVEL button and dial, with bar graph headroom indication.
How to adjust EQ curve bands by pressing buttons and turning the dial.
Saving modified EQ curves to program numbers, with options for channel-specific storage.
Engaging bypass mode to route signal without EQ effect, indicated by display.
To Next Page